Kyoritsu Multi Function Electrical Installation Tester 12 in 1. Insulation, Continuity, Earth, Phase Rotation, and More.

A lot of Testing Power in the hands of Electrical Installation Professionals!

• DISPLAY
  Color LCD 3.5 inches dot matrix.
• ATT
  Anti-Trip Technology (with 2 & 3 wire) for no trip LOOP L-PE testing on all RCDs.
  With 2 wire only, very useful in case of no Neutral (i.e. 3-phase motor lines).
• LOOP
  ・High test current range of 2Ω with 0.001Ω resolution.
  ・Zs Limit compares the values required by Electrical Installations Standard with measured results.
• RCD
  ・Type AC, A, F, B(General & Selective), EV and Variable RCDs.
  ・Single and Auto test, Ramp test and Contact voltage.
• EARTH
  Earth resistance test 2 and 3 wires with all accessories included.
• INSULATION
  Resistance test 100, 250, 500 & 1000V with auto discharge voltage.
• CONTINUITY
  Continuity test at 200mA or 15mA with selectable buzzer for fast judgment.
• PHASE ROTATION
  On 3-phase lines with clear indication of the sequence on the display.
• VOLTS
  TRMS Voltage measurements 2 to 600V, Mains Frequency.
• HELP
  Display shows how to connect the instrument according to the function selected.
• SPD
  Surge Protection Device test, for SPD that uses varistor.
• PAT
  Portable Appliance Tester function, for Insulation and Protective conductor resistance test
• SAFETY
  IEC 61010-1 CAT Ⅳ 300V / CAT Ⅲ 600V, IEC 61557-1,2,3,4,5,6,7,10.

Large LCD & HELP function

• All the test data is shown in one large colored screen.
• HELP function will show how to connect the instrument according to the function selected

Operation in 3 simple steps & Hands free testing

1. Set the rotary dial to your testing range.
2. Connect the instrument to the installation under test.
3. Press the test button.(By remote probe or using the Lockdown function of the test button.)

Anti-Trip Technology (with 2 & 3 wire)

For no trip LOOP L-PE testing on all RCDs.

With 3 wire (L, N, PE), to get the best accuracy readings.

With 2 wire only, very useful in case of no Neutral (i.e. 3-phase motor lines).

Loop Impedance 0.001 resolution

High test current range of 2Ω with 0.001Ω resolution.

Zs/Ra Limit

Zs Limit compares the values required by Electrical Installations Standard with measured results.

The verification of safety requirement on an electrical installation is simplified by using Zs/Ra Limit function. This function will automatically check if the measured loop impedance for TN (or earth loop for TT) is low enough to trip (disconnect) the MCB / Fuse / RCD giving the result of PASS or FAIL on the display.

SPD test

SPD (Surge Protection Device) which contains varistor can be tested measuring the tripping voltage without damage it.

PAT test

PAT test (PAT = Portable Appliance Tester) It is possible to check the insulation resistance and earth bond continuity of portable appliances for class I and II.

Connectivity

Use the PC application KEW Report to inprove work efficiency.

KEW 6516 can download the test data by connecting the USB adaptor (Model 8212-USB) and then print complete Test Reports by a PC.

Specification

Please download “KEW Report(software)” from here.

※1　7187A:British plug, 7218A:(EU)European SCHUKO plug, 7221A:(SA)South african plug, 7222A:(AU)Australian plug

MULTI FUNCTION TESTER and EVSE ADAPTER Kits